FAQ
Should I choose Series 1 or Series 2?
If you want to use extensions (button panel, control device, timer), choose the Series 2 all-in-one. If the virtual display is all you need, either is fine. Both work the same as a virtual display, and improvements such as the high frame rate (120fps) in 1.2.0 are in Series 2 as well.
Series 2 (2.0.0 and later): Runs extensions. An all-in-one download with all three (CUTTOUCH, SlothCon, SlothTimer) is also available. You can export and import your settings too. All extensions start turned off; if you leave them off, it works just like Series 1 (see the extensions).
Series 1 (up to 1.x): The simple edition with just the virtual display (SlothMon as before). It does not include the extension system.
When does the administrator prompt appear?
Only on first start, when the virtual display driver (MttVDD) is installed, and when a new screen resolution is added to the PC. A device that is already registered connects without the prompt from then on.
How do I remove the driver?
Uninstall "SlothMon Virtual Display Driver" (shown as "SlothMon 仮想ディスプレイドライバー" if it was installed by version 1.1.0 or earlier, or on a Japanese Windows) in Windows "Settings → Apps". You can also run uninstall-driver.bat in the SlothMon folder (quit SlothMon first, then choose "Yes" in the prompt).
I moved or deleted the SlothMon folder, and now I cannot remove it from "Settings → Apps"
Removal from "Settings → Apps" uses the location of slothmon.exe from when the driver was installed. If you move or delete the folder, the exe is no longer there and removal fails. Remove it in one of these ways.
Option 1: Remove it with a copy of SlothMon
Extract a downloaded zip (any version) and run uninstall-driver.bat in the folder. The entry in "Settings → Apps" is removed too.
Option 2: Remove it in Device Manager (if you do not have the SlothMon zip)
1. Right-click the Start button and open "Device Manager".
2. Expand "Display adapters", right-click "SlothMon 仮想ディスプレイ" (the device name is in Japanese), and choose "Uninstall device".
3. In the confirmation, check "Attempt to remove the driver for this device" and press "Uninstall".
This leaves only the entry in "Settings → Apps", which does no harm. To remove it as well, use option 1.
How do I update to a new version?
Quit SlothMon and extract the new zip over your current folder. The driver keeps working as is. Moving from Series 1 to Series 2 works the same way: extract the Series 2 all-in-one over your folder to add the extensions too.
How do I use extensions?
In the Series 2 SlothMon window, turn on the ones you want under "Extensions" (all are off at first). Their names appear in the menu at the top of the window. Choose one to open its settings on your PC and its control screen on the connected phones. Go back to "Home" and the phones show the PC screen again. Each extension is described, with separate downloads, on the extensions page.
Can I move my settings to another PC?
In Series 2, use "Export / import settings" in the SlothMon window. It saves your switches and each extension's on/off state and settings as one file in your Downloads folder, which you can import on another PC. The connection key and extension sign-in details (such as the OBS password) are not included.
I opened the QR code on my phone but it does not connect
Please check the following:
1. Your PC and phone are connected to exactly the same Wi-Fi (router) (networks that block device-to-device traffic, such as guest Wi-Fi, will not work)
2. Your PC's network is set to "Private". Windows 11 sometimes sets a newly joined Wi-Fi to "Public". If it is your home or office network, open the properties of the connected network in "Settings" → "Network & internet" and change it to "Private network"
3. You chose "Allow access" in the Windows Firewall prompt on first start. If you chose "Cancel", or if you use a public network, check SlothMon in "Windows Security" → "Firewall & network protection" → "Allow an app through firewall"
If the firewall is blocking SlothMon, or it is not allowed on a public network, the SlothMon window on your PC also shows the reason and how to fix it.
I see "Switching to the classic mode (MJPEG)" / the video stutters
Since 1.1.0, video is sent over WebRTC. If WebRTC cannot connect, SlothMon switches to the classic mode (MJPEG, the same as up to 1.0.0) within a few seconds, and a notice with the reason appears at the top of the phone screen for a few seconds. MJPEG works, but with more delay and more data.
A common cause is Windows Firewall blocking SlothMon's video traffic (UDP). In that case, the SlothMon window on your PC shows "Video will use MJPEG" with the reason and how to fix it. Check that SlothMon is checked in "Windows Security" → "Firewall & network protection" → "Allow an app through firewall". Browsers without WebRTC support, and browsers inside other apps, also use MJPEG. Once it has switched to MJPEG, reload the page to try WebRTC again.
My phone's screen turns off while it is showing
After the picture appears, tap the screen once or press the "Full screen" button. From then on, your phone's screen stays on while the video is showing. This tap is not sent to the PC. If you reload the page, tap again.
If neither the PC screen nor touches on the phone change for 15 minutes, the phone's screen turns off according to its own settings. If you are playing music on the phone, the tap may stop the music.
Can I use pen pressure?
Since 1.0.0, when you draw with a pen such as Apple Pencil or S Pen, pressure and tilt are sent to the PC. On Windows, drawing apps that support Windows Ink read the pressure. Finger touches still arrive as mouse input.
In CLIP STUDIO PAINT for Windows, choose "TabletPC" in "File" → "Preferences" → "Tablet". Start SlothMon before your drawing app. Drawing apps check for a pen when they start, so if SlothMon starts later, you may not be able to choose TabletPC or pressure may not work. In that case, restart the drawing app.
While pen pressure is enabled, the PC sees a pen as connected. If you do not need it, turn off "Use pen pressure" in the SlothMon window (the pen then arrives as mouse input). The Mac version also sends pressure and tilt, but it has not yet been fully tested with drawing apps. Please let us know if it does not work well.
The app crashed and the virtual display was left behind
Start SlothMon again and quit it normally, or in Windows "Settings → System → Display", set that display to "Disconnect this display".
Does traffic go through an outside server?
No. Both video and input are exchanged only within the local network between your PC and phone. The only exception is when you set up OBS, Twitch, YouTube, or HTTP request buttons in the Series 2 extension CUTTOUCH: it then talks to those destinations.
Can other people on the same Wi-Fi see or control my screen?
Only devices that scanned the QR code shown in SlothMon on your PC can connect. The QR code contains a connection key unique to your PC, and access without the key is refused. To reset every device you have allowed, press "Reset connection key" under the QR code in SlothMon. Devices that scanned the QR code before, and pages saved to home screens or bookmarks, will no longer connect.
Since 1.1.0, video and input are encrypted with WebRTC, so people on the same Wi-Fi who watch the traffic cannot see the screen or your input. However, loading the page and the connection key are not encrypted, so do not use SlothMon on untrusted networks (see "Notes on networks").
My antivirus detected or removed it
SlothMon is software by an individual developer without a code signature, and it does things antivirus software watches closely, such as installing a virtual display driver and sending mouse input. Because of this, it is occasionally detected by mistake.
You can check that a downloaded file is genuine against the SHA-256 listed under "Releases". Run Get-FileHash downloaded-file.zip in PowerShell; if the value matches, it is the same file distributed on this page. Only if it matches, use your antivirus "restore" or "exclusion" setting to allow it. If it does not match, delete it without using it and download it again from this page.
Can I use it on a Mac?
Yes. A Mac version is available for Apple Silicon Macs (M1 or later) running macOS 11 or later. Intel Macs are not supported. Like the Windows version, the Mac version adds your phone as an extended display for the Mac, matches the resolution to the phone, and can switch to portrait. The extended display relies on a macOS mechanism that is not public, so where it cannot be created, SlothMon shows the Mac screen on the phone as is (mirroring). The Mac version also sends video over WebRTC since 1.1.0 (WebRTC has not yet been tested on a real Mac; if it cannot connect, it switches to the classic mode (MJPEG) automatically).
The Mac version is not signed with an Apple developer certificate, so the first time it will not open and shows a message such as "cannot be opened because the developer cannot be verified". Extract the zip, move SlothMon.app to the "Applications" folder, try to open it once, and then press "Open Anyway" near the bottom of "System Settings" → "Privacy & Security".
When it starts, the SlothMon window asks for "Screen Recording" and "Accessibility" permissions. Screen Recording is needed to show the screen on the phone, and Accessibility to pass input from the phone to the Mac. Open the settings from the buttons and turn on SlothMon (after turning on Screen Recording, restart SlothMon). If asked about "Local Network", choose "Allow".
Since 1.0.0, the Mac version is signed differently, so these permissions normally remain when you replace it with a newer version. However, when moving from 0.9.x to 1.0.0, you need to grant them again. If SlothMon is turned on in the list but the notice does not go away, remove SlothMon from the list with "−" and turn it on again.
In the Series 2 all-in-one, move both SlothMon.app and the SlothMon-Extensions folder from the zip into your Applications folder (SlothMon loads extensions from SlothMon-Extensions next to the .app). The Mac versions of the extensions have been checked only in a virtual environment.